Apr 03, 2015  VW Passat B5.5 Climatronic system How to enter in Diagnostic submenu HOT Engine Chequered Flag Racing. (B5/B5.5) 1996-2005, Common Issues, Engines, Inspection - Duration: 4:01.

Loading Volkswagen B5 Passat VCDS Info Volkswagen Passat B5 VCDS Info Updated 21 Dec. 2010 Ross-Tech is not responsible for any damage or problems that may result from following these instructions.

They are to be used at your own risk. Specific Modules: -Engine: -- KWP-1281, KWP-2000 VCDS works well with all engines available in the U.S. And most engines that users have tested in overseas markets. See the for any limitations for KWP-2000. Idle Speed Adaptation (see your Repair Manual): With engine warmed up, at idle: [Select] [01 engine] [Adaptation - 10] Enter channel 01 Enter an adaptation value between 124 and 132 [Save] Throttle Body Adaptation: Turn the key on but do not start the car. [Select] [01 - Engine] [Measuring Blocks - 08] Group 060 or Group 98 [Go!] [Switch to basic settings] Once you do this you will see the top right display say ADP RUN. The TB adaptation is being done as soon as you switch to basic settings.

You will see the values change and hear the TB cycle for the first few seconds then it will stop. Leave it in basic mode for about 30 seconds, then switch back to normal settings and you're all set. Be sure not to touch the accelerator and make sure the engine is NOT running when you do this! Activating Cruise Control on a new ECU (DBW): Factory fresh ECU's often come with cruise control de-activated.

[Select] [01 - Engine] [Login - 11] Enter 11463 to activate cruise control [Do It!] -Auto Trans: -- KWP-1281 VCDS works fine -ABS Brakes: -- KWP-1281 VCDS works fine -HVAC: -- KWP-1281 VCDS works fine -Airbags: -- KWP-1281 VCDS Works fine. -Instruments: K1 -- KWP-1281 VCDS Works fine.

- CA N Gateway: -- KWP- 1281 VCDS Works fine. This is physically located in the Instrument Cluster, but functionally it controls communications on the CAN-BUS.

Look at the last digit in the coding. Add the values for the options together to get the correct coding. 0 - No available equipment +1 - Automatic Transmission +2 - ABS Brakes +4 - Airbags So, if you want to support Automatic Transmission, ABS Brakes, and Airbags, (add 1+2+4 = 7) = 00007. -AWD – Purely Mechanical! The quattro system in these cars is purely mechanical, no electronics at all.

This address is used by the Haldex system used in transverse-engine cars like the TT, the A3, and various Golf/Bora models. - Central Locks: -- KWP- 1281 Only on non-US vehicles with manual crank windows.

VCDS Works fine. - Navigation: -- KWP- 1281 VCDS Works fine. - Central Covenience: -- KWP1281 Only on vehicles with power windows. There are numerous options/ features that can be set. Selective Unlocking: [Select] [46 - Cent.

Conv.] (35 - Cent. Locking for manual window cars) [Recode - 07] Write down the existing coding for future reference.

Enter 5-digit code from below [Do It!] Look at the existing Soft. If you have selective unlocking (press the unlock button on the remote once to open the driver's door, twice to open all the doors) the last digit of your coding should be an odd number. To make all doors unlock, add 1 to the coding. Lock/Unlock Horn/Flash: [Select] [46 - Cent. Conv.] (35 - Cent.

Locking for manual window cars) [Adaptation - 10] Channel (03.08) Adaptation Value (1 = on, 0 = off) [Save] Channel 03 Auto Lock Channel 04 Auto Unlock Channel 05 Unlock, horn sounds Channel 06 Lock, horn sounds Channel 07 Unlock, turn signals flash Channel 08 Lock, turn signals flash - Headlight Range: – KWP1281 VCDS appears to work fine. This is the OEM Xenon HID system.

- Radio: – KWP1281 VCDS appears to work fine. Radio Recoding: [Select] [56 - Radio] [Recode - 07] Write down the existing coding for future reference.

Loading Passat Volkswagen Passat Application Chart Updated 14 Jul. 2011 1995-1997 Passat 1998-2005 Passat 2005.5-2011 Passat 2011-2012 Passat CC Platform B4 B5/B5.5 B6/VW46X Chassis 3A 3B 3C/35/AN Model Years (non-US) 1994-1996 1997-2005 2006+ Which Interface to Buy?

(USB) (Serial) (USB) Micro-CAN (Will not work!) Also needed is a for some pre-1996 models. (USB) (Serial) (USB) Micro-CAN (Will not work!) (USB) (Serial) KII- USB (Will not work!) (USB) Module ID & Number 01 Engine Y (KWP-2000 from 2002+) Y, (CAN) 02 Auto Trans Y (If equipped) (If equipped, KWP-2000 from 2002+) Y, (CAN, if equipped) 03 ABS Brakes Y (If equipped) (If equipped) Y, (CAN) 08 HVAC N (If equipped with Automatic Climate Control) Y, (CAN, if equipped) 09 Electrical Control N N Y, (CAN) 0F Digital Radio N N Y, (CAN, if equipped) 13 Auto Dist. Regulation N N Y, (CAN, if equipped) 15 Airbags Y Y, (CAN) 16 Steering Wheel N Y (If equipped) Y, (CAN) 17 Instruments N Y, (CAN) 18 Aux. Heater N N Y, (CAN, if equipped) 19 CAN Gateway N (If equipped) Y, (CAN) 1C Position Sensing N N Y, (CAN, if equipped) 22 All Wheel Drive N (purely mechanical) Y, (CAN, if equipped) 25 Immobilizer Y (If equipped, non-US only) (Integrated with cluster in address 17 in US models) Y, (CAN) 35 Central Locks N (If equipped with manual crank windows, non-US only) N 36 Seat Mem. N Y (If equipped) Y, (CAN, if equipped) 37 Navigation N Y (If equipped) Y, (CAN, if equipped) 3D Special Function N N Y, (CAN, if equipped) 42 Door Elect, Driver N N Y, (CAN) 44 Steering Assist N N Y, (CAN) 46 Central Convenience N (If equipped with power windows) Y, (CAN) (This module's functions are handled by 09-Cent Elect in the newest models).